Need help?Do you have a question about the FLIR Raymarine RS150 and is the answer not in the manual?
General| Update Rate | 10 Hz |
|---|---|
| Nominal Voltage | 12V DC |
| Power Consumption | 1.5W |
| Humidity | Up to 95% non-condensing |
| Mounting | Pole or surface mount |
| Type | GPS |
| GNSS | GPS, GLONASS |
| Frequency | 1575.42 MHz (L1) |
| Accuracy | < 3 m (10 ft) |
| SBAS | WAAS, EGNOS, MSAS |
| Protocols | NMEA 2000 |
| Operating Voltage Range | 9V to 32V DC |
| Power Supply | NMEA 2000 |
| Operating Temperature | -25°C to +55°C (-13°F to +131°F) |
| Waterproof Rating | IPX6 |
| Compass Safe Distance | 0.5 m (20 in) |
Crucial warnings regarding installation, potential ignition sources, grounding, and voltage.
Guidelines for cleaning, service, water ingress, and general maintenance.
Guidance on using ferrites for EMC performance and correct installation.
Connecting to other equipment, conformity, technical accuracy, disposal, and IMO/SOLAS.
Steps to register the product for full warranty benefits.
Details about the document, RS150 overview, features, and applicable products.
Essential steps for installation planning and a list of included parts.
Procedures for software updates and a list of required installation tools.
Selecting a location, avoiding RF interference, and safety considerations.
Physical dimensions of the unit and guidelines for optimal EMC performance.
Best practices for cable routing, strain relief, shielding, and connection types.
Details on powering the SeaTalkng network and understanding system loading limits.
Methods for connecting power to the network and sharing circuit breakers.
Connecting to NMEA 2000 networks and an example of SeaTalkng network setup.
Instructions for surface mounting and pole/rail mounting the unit.
Steps for installing the unit using the deck mounting kit.
Instructions for mounting the unit using the deck mounting kit with a bracket.
Steps for installing the unit using the deck mounting kit with a riser.
Procedure for safely detaching the RS150 unit from its mounting adaptor.
Performing initial tests and understanding GPS status, sky view, and satellite data.
Identifying and resolving common problems with installation and operation.
Specific troubleshooting steps for "No Fix" status and connection faults.
Interpreting LED status indicators for system health and faults.
Guidance on routine maintenance, equipment checks, and proper product cleaning.
Information on obtaining support, service, warranty, and accessing learning materials.
Detailed technical data including voltage, power, environment, and compatibility.
Lists available accessories and describes SeaTalkng cabling components.
Comprehensive list of SeaTalkng cables and accessories with part numbers.
Lists supported NMEA 2000 Parameter Group Numbers (PGNs) for data transmission.
To Next Page