FLIR T6 series User Manual

Programming the camera (time
lapse)
20
20.1 General
You can program the camera to save images periodically (time lapse).
20.2 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to
(Recording mode).
3. Push the joystick. This displays a submenu.
4. Select
(Time lapse).
5. Push the joystick. This displays a dialog box, where you can set the save conditions:
• Save interval: Use the joystick to set the time interval between each saved image.
• Total number of images: The periodic saving will stop when the set number of im-
ages have been saved.
6. Push the joystick. This closes the dialog box. The time interval is displayed at the top
of the screen.
7. To start the periodic saving, briefly push and release the Autofocus/Save button.
#T559880; r.15724/15724; en-US
54

FLIR T6 series Specifications

General

Brand	FLIR
Model	T6 series
Category	Thermal cameras
Language	English