FLIR T6 series User Manual

Handling the camera13
7. Carefully push the lens into position.
8. Rotate the lens 30° degrees clockwise.
13.12 Calibrating the compass
13.12.1 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to
(Settings).
3. Push the joystick to display the Settings menu.
4. Select Device settings and push the joystick.
5. Select GPS & compass and push the joystick.
6. Select Compass. If the Compass check box is unchecked, push the joystick to ena-
ble the compass.
7. Select Calibrate compass and push the joystick. Follow the on-screen instructions.
Note
You have to rotate the camera slowly.
13.13 Changing the viewfinder eyecup
CAUTION
Applicability: Cameras with a viewfinder.
Make sure that the beams from the intensive energy sources do not go into the viewfinder. The beams
can cause damage to the camera. This includes the devices that emit laser radiation, or the sun.
Note
This item is dependent on the camera model.
#T559880; r.15724/15724; en-US
30

FLIR T6 series Specifications

General

Brand	FLIR
Model	T6 series
Category	Thermal cameras
Language	English