23
Start-up
6.2 Breathing air humidifier
Fill with water:
The humidifier is a standard part of the FLO Vigaro. It consists of 3 parts: the
heating plate, the beaker and the humidifier lid.
To fill the beaker, first detach all hoses from
the device.
The air humidifier lid and the
beaker connected to it can now
be lifted out of the device.
Take the humidifier lid off the beaker by
twisting lightly.
The beaker can now be filled with
water.
Here the two limits,
minimum 100 ml, maximum 300 ml
should be observed.
Use boiled water to avoid calcification.
To Next Page
Loading...