Alarms
28
8 Alarms
The device is equipped with various alarms to warn the user / patient about
errors in operation or device faults. Alarm settings cannot be changed.
All alarm messages include numbers at the bottom, which are used as a code
for the alarm.
Alarms are divided into three groups:
yellow LED is
constantly lit up
There are no high priority alarms.
If more than one fault occurs at the same time, only the first fault will be
displayed.
Should alarms persist despite the fault having been corrected, please
contact your dealer.
The alarm system should be tested at regular intervals as part of a
function test. Consult the service manual regarding instructions for
this test.
To Next Page
Loading...