27
Logix 3400MD Digital Positioner FCD LGENIM3404-00 – 9/09
flowserve.com
Fieldbus
Block
Index
Fieldbus Variable
Name
Transducer
Block
Fieldbus
Datatypes
Logix Positioner
R/W Description
Register Type
Fix
Pt
Rd
Variable Name
32 PRESS_CTRL_
WINDOW
XDTB_MAIN FLOAT 54 S_INT /100 PS_Window SRW Setup, Pressure Control, Window
Size
33 FINAL_VALUE_
CUTOFF_HI
XDTB_MAIN FLOAT 59 S_INT /100 MAXcutoff SRW Setup, MPC, Tight Shutoff
Threshold, Open
34 FINAL_VALUE_
CUTOFF_LO
XDTB_MAIN FLOAT 60 S_INT /100 MINcutoff SRW Setup, MPC, Tight Shutoff
Threshold, Closed
42 FINAL_VALUE_
CUTOFF_
HYSTERESIS
XDTB_TECH FLOAT 61 S_INT /100 MPChyst SRW Setup, MPC, Tight Shutoff Hysteresis
35 STOP_HI_POS XDTB_MAIN FLOAT 62 S_INT /100 SoftStopHigh SRW Setup, Soft Stop Limit, Upper
36 STOP_LO_POS XDTB_MAIN FLOAT 63 S_INT /100 SoftStopLow SRW Setup, Soft Stop Limit, Lower
37 STROKE_TIME_
OPEN_LIM
XDTB_MAIN FLOAT_S 64 U_INT NO StrokeOpenTime NRW Setup, Stroke Delay Time, Opening
38 STROKE_TIME_
CLOSE_LIM
XDTB_MAIN FLOAT_S 65 U_INT NO StrokeCloseTime NRW Setup, Stroke Delay Time, Closing
43 CURVE_X XDTB_TECH FLOAT 66 S_INT /100 CURVEx [1-11] SRW Setup, SW Characterization, X-Axis,
Points 1-11
43 CURVE_X XDTB_TECH FLOAT 67 S_INT /100 CURVEx [12-21] SRW Setup, SW Characterization, X-Axis,
Points 12-21
44 CURVE_Y XDTB_TECH FLOAT 68 S_INT /100 CURVEy [1-11] SRW Setup, SW Characterization, Y-Axis,
Points 1-11
44 CURVE_Y XDTB_TECH FLOAT 69 S_INT /100 CURVEy [12-21] SRW Setup, SW Characterization, Y-Axis,
Points 12-21
Control: Calibration Parameters
25 CALIBRATE XDTB_MAIN UNSIGNED 8 33 U_CHAR NO Cal_State RW Test, Calibration, Mode Setting
45 STROKE_TIME_CAL XDTB_TECH FLOAT 70 U_INT /100 StrokeTime R Calibration, Measured Stroke Time
46 STROKE_TIME_
DOWN
XDTB_TECH FLOAT 71 U_INT /100 StrokeTimeDn R Calibration, Measured Stroke Time
47 STROKE_TIME_UP XDTB_TECH FLOAT 72 U_INT /100 StrokeTimeUp R Calibration, Measured Stroke Time
48 HALL_DOWN XDTB_TECH UNSIGNED 16 75 U_INT NO Hall_Down SRW Calibration, Hall Sensor, A/D Counts,
Down Position
49 HALL_UP XDTB_TECH UNSIGNED 16 76 U_INT NO Hall_Up SRW Calibration, Hall Sensor, A/D Counts,
Up Position
50 HALL_RANGE XDTB_TECH UNSIGNED 16 77 U_INT NO Hall_Range SRW Calibration, FB, Valve Stem, A/D
Counts, Range
51 HALL_AD_cOUNT XDTB_TECH UNSIGNED 16 78 AD_REG NO Hall_Instant R Status, Hall Sensor, A/D Counts,
Instantaneous
52 HALL_NULL_PCT XDTB_TECH UNSIGNED 16 79 S_INT NO Hall_Null SRW Calibration, Hall Sensor, A/D Counts,
Null Position
53 FB_ZERO XDTB_TECH UNSIGNED 16 80 U_INT NO FB_Zero SRW Caliberation, FB, Valve Stem, A/D
Counts, @Zero%