12
WARNINGS:
Electric work must be executed only by a specialized employee.
Check that the voltage is the same as per the name plate present on the electric motor.
Electric cables must have the correct dimensions as requested by the
electric motor.
It is forbidden to work on the electric motor when it is in tension.
During the electrical connection, the principal electric power line must be disconnected and the work must be
executed only by specialized workers following international and local laws and rules.
Electric cables must be protected considering the installation area and placed to avoid obstruction on the
operation of the machine, following specific applicable rules.
It is forbidden to introduce the hands inside the screw in operation.
Any component of the machine can be used as support to go up the machine!
To Next Page
Loading...