17
The emergency button must be located near the machine and it must be easily approachable.
Safety devices include:
• Enclosures, covers or automatic protection of the screen zone
• Protection covers of the electric motor’s fan
• Gearmotor shaft protection cover
it is responsibility of the installer to assure the presence of all protections necessary to grant a safe use of the plant
both in phase of use and maintenance.
RESIDUAL RISKS
FLUITECO srl has produced and built the machine specifically trying to reduce the risks as much as possible.
Some risks related to the incorrect maintenance process otherwise are impossible to be deleted during the designing
phase and realization of the machine. Other sources of risk are represented from behaviors that are not
corresponding to what this manual is explaining and also at the missing respect of Laws and Standards related to
accident prevention and safety at work.
This following table summarizes the risks and the behaviors to avoid them.
It is forbidden to do maintenance when the
machine is in motion.
Prevent access to the channel discharge while
the machine is working (with railings, fences,
interlocking openings).
The machine must be equipped with its own
electrical system: by removing the covers of
the motor terminal you can access to the
electrical parts
Put the machine on safety mode before every
operation.
Only specialized personnel can access to the
parts electrically connected. The electric part of
To Next Page
Loading...