6
HOW TO IDENTIFY THE UNIT
The machine can be identified by the descriptions on the metallic Plate here represented. The Plate is easily
recognizable on the metallic frame of the unit.
On the Name plate it is possible to find the following
details:
1) Name and address of the manufacturer
2) Machine model
3) Serial number
4) Years of manufacturing
5) Weight
6) Power
7) Tension of the motor
Plate data cannot be modified.
In the case of necessity, when contacting our after sales service, please provide us with the serial number of the
machine as to quickly identify it.
CONFORMITY DECLARATION
The machine is manufactured according to the directive 2006/42/CE. The machine is destined to be part of a plant
that will be responsibility of the installer.
Attached with the present manual is reported the Conformity Declaration provided for the directive 2006/42/CE.
TECHNICAL SERVICE
To obtain the best performance from the machine and to avoid any possible problem that could cause the
termination of the warranty it is necessary to follow all the indications of such operation and maintenance manual.
This operation and maintenance manual is part of the machine and it must be easily reachable by all the personnel in
charge.
In case of necessity to contact FLUITECO, even after reading the instruction, it is necessary to have this manual close
at hand, to have a better understanding of all the explanations.
To Next Page
Loading...