16
• Personnel in charge must use a proper workwear. It is necessary to ask for this workwear (gloves, shoes, …)
to the safety manager.
• Disconnect electric power before making any operation and/or maintenance to the machine.
• To avoid any accidental startup of the machine during inspections, cleanings and maintenance, it is necessary
to turn the general switch on the position OFF and push the emergency button to block the machine.
• Before starting the machine it is necessary to be sure that all the safety devices are active.
FLUITECO srl refuses every responsibility for damage to people and objects caused form the absence and/or
tampering of the safety devices (notices and protections).
It is necessary to make inspection of the plant minimum once per day, or once each working shift to check possible
damages or defects that can be seen from outside.
In case of any anomaly, stop immediately the plant, in particular if there are risks for your safety or the safety of
the plant.
Be sure that safety devices, safety notices and the identifying plate of the plant are always clearly readable.
the connection to the floor of the external metallic part of the machine is compulsory.
It is forbidden to remove safety and warning notices.
It is forbidden to start the work with safety devices opened or to open them during the working.
Touching the rotating part of the machine could cause serious injuries.
Never introduce hands inside the outlet of the compaction zone.
SAFETY DEVICES OF THE PLANT
Every plant must be provided, by the installer, with an emergency button (red color) to stop the plant. Pushing this
button in particularrly dangerous conditions the plant must stop immediately.
To Next Page
Loading...