11
A bad fixation could cause damage to the employees and to the objects surrounding the machine. It is necessary
to follow very carefully the instructions of this manual and verify all of the bolts’ fixation and the stability of the
whole structure.
The machine must be positioned without any inclination change in respect to the inclination projected during
construction.
ELECTRICAL CONNECTION
Machine is supplied with standard electric components for the normal operation of the machine:
1. Screw electric motor
2. Washing electric motor
3. Solenoid valves of the washing system
4. Electronic torque limit switch (optional)
It is responsibility of the user to provide the electric panel and its installation and connection to the machine,
following international laws and local rules.
Electric work must be executed only by a specialized worker.
Electric motor, solenoid valves and electronic torque limit switch connections must be accomplished by the installer
and they must be executed following each manufacturer’s manual attached to the present manual.
The manufacturing and placement of the electric panel is under the responsibility of the installer. We recommend
you are very thorough with the appropriate protection against excessive adsorption of the electric motor. It is further
compulsory to foresee the no possibility of the automatic re-start of the machine in case of interruption and restore
of the electric current.
To Next Page
Loading...