7
Please always remember to inform our Service about the serial number of the machine. The serial number is always
reported on the Plate of the machine.
SAFETY
This machine has been designed and constructed according to the applicable regulations for prevention of
accidents in reference both to the mechanical and electrical parts. The safety systems of which it is equipped have
the function to protect the operator and the machine itself during the working phases.
Where it has not been possible to eliminate potentially dangerous situations, these have been reported by
appropriate labels or labels applied in the surrounding of the installation area. Periodically check that they are
present and in good condition.
SAFETY LABEL POSITION
On the machine some labels are applied to indicate the points of residual risks for the user or important points of the
machine.
You must ensure that these do not deteriorate over time or come off.
If you encounter this situation, please contact our support department for you to ship the damaged or missing labels to
reapply when originally planned.
To Next Page
Loading...