9
It is forbidden to use clamps, rings, open hooks or other system that does not guarantee the safety
in the lifting operation.
The lifting and positioning operation must be executed only by competent personnel. it is forbidden to remove the
hooks from the eyelets while transporting the machine.
WARNING
The employee in charge of the lifting and positioning of the machine must operate with maximum attention to avoid
any damage to the goods or any person in proximity. Nobody can remain under the area where the machine is
hanging.
Check the efficiency of the lifting system to avoid damage to the operator or the ones surrounding the area.
It is forbidden to use a lifting chain that can damage the surface of the machine. If the chain will damage the
surface of the steel, it is necessary to make again the surface treatment of passivation.
Transport packing must be removed only near the installation area (machine is supplied without packing in the
standard version).
INSTALLATION AREA
The area destined for the positioning of the machine must be provided by the user with all the connections (electric
power, air, etc..) for the operation of the machine, in conformity with the information of the present manual, and in
conformity with the characteristics of the electric and electronic components. It is responsibility of the user that the
positioning area are in line with the local laws and safety rules: aeration, ground lead, appropriate illumination, etc...
In particular places with cold weather, machines without insulation (optional), can be used only inside a proper
building. Ice inside extraction screw conveyor can cause damages on the gearmotor or in the solids outlet.
To Next Page
Loading...