Fluke 1630 User Manual

Earth Ground Clamp
Maintenance
13
Cleaning the Clamp
WCaution
To avoid damaging the Clamp, do not use aromatic
hydrocarbons or chlorinated solvents for cleaning. These
solutions will react with the plastics used in the Clamp.
Clean the instrument case with a damp cloth and mild detergent.
Replacing the Battery
XWWarning
To avoid false readings that could lead to possible electric
shock or personal injury, replace the batteries as soon as
the low battery indicator (M) appears.
To replace the battery:
1. Turn the rotary switch to OFF.
2. Use a Phillips screw driver to remove the bottom case screws.
3. Lift and remove the bottom case.
4. Remove the old battery.
5. Replace the battery with a new 9-V battery.
6. Install the bottom case and tighten the screws.

Fluke 1630 Specifications

General

Control type	Buttons
Housing color	Red, Black, Yellow
Maximum voltage	1000 V
Built-in display	Yes
Display technology	LCD
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Battery size	AA
Battery technology	Alkaline
Battery life (measurements)	15
Number of batteries supported	4

Weight and Dimensions

Depth	48 mm
Width	105 mm
Height	283 mm
Weight	880 g