Portable Pressure Calibrator
Other Menu Controlled Functions
15
Save and Recall Menu Setups
The current Product setup is saved for recall at the next power up. Five different setups
can be saved for later use. To access these setups, go through the menu list until SETUPS
is shown. Push the SETUPS softkey from the Setups Main menu. Push the RECALL
softkey to recall a setup or the SAVE softkey to save a setup. Push the DONE softkey to
do nothing and go to the home menu.
If SAVE or RECALL is selected, push the arrow keys to select the setup location. Then
push the SAVE softkey to store the current setup into the selected location. You can also
push the RECALL softkey to recall the setup stored in the selected location. The display
menu will go to home. See Figure 14.
hbb015.eps
Figure 14. Setups Menu
Automatic Shutdown
The Product can be set to turn off after a preprogrammed time interval, 0 minutes to 30
minutes. To set the automatic shutdown, go through the menu list until AUTO OFF is
shown. Select the AUTO OFF option on the Auto Shutdown main menu
Push the arrow softkeys to choose the number of minutes the Product functions. Or push
the down arrow softkey until OFF is shown to disable the automatic shutdown. When
you have made the selection, push the AUTO OFF DONE softkey to set the selection.
The Product menu will go to the home menu. The auto shutdown timer is reset when a
button is pushed. See Figure 15.
hbb016.eps
Figure 15. Auto Shutdown Menu
To Next Page
Loading...
