381
Calibration Manual
4
Table 1. Symbols
Symbol Meaning Symbol Meaning
AC (Alternating Current)
J
Earth ground
DC (Direct Current)
AC and dc current.
X Hazardous voltage P
Conforms to European Union
directives.
W
Risk of Danger. Important information.
See Manual.
)
Conforms to relevant North American
Safety Standards.
Battery. Low battery when shown.
T
Double insulated
CAT III
IEC Measurement Category III
CAT III equipment has protection
against transients in equipment in
fixed-equipment installations, such as
distribution panels, feeders and short
branch circuits, and lighting systems in
large buildings.
CAT IV
IEC Measurement Category IV
CAT IV equipment has protection
against transients from the primary
supply level, such as an electricity
Meter or an overhead or underground
utility service.
®
Examined and licensed by TÜV
Product Services.
Conforms to relevant Australian
standards.
-
Do not apply to or remove from
HAZARDOUS LIVE conductors.
,
Application around and removal from
HAZARDOUS LIVE conductors is
permitted.
~
Do not dispose of this product as unsorted municipal waste. Go to Fluke’s website for recycling
information.
Note
The Measurement Category (CAT) and voltage rating of any combination
of test probe, test probe accessory, current clamp accessory, and the Meter
is the LOWEST rating of any individual component.
To Next Page
Loading...
