Fluke 45 - 4-28. Continuity;Hysteresis Threshold Calibration (Computer Interface); 4-29. Frequency Calibration (Computer Interface); 4-30. Concluding Calibration Using the Computer Interface; 4-31. Alternate Ohms Calibration (Computer Interface)

Operating the Meter Using the Computer Interface
Sample Programs Using the IEEE-488 Computer Interface
5
5-31
Sample Programs Using the IEEE-488 Computer Interface
Figure 5-6 illustrates three annotated GWBASIC programs, that demonstrate how the
meter can be used with three different IEEE-488 Interface driver cards.
aam24s.tif
Figure 5-6. Sample Programs for IEEE-488 Computer Interface