Fluke 5080A Getting Started Manual

OPERATOR SAFETY
SUMMARY
WARNING
HIGH VOLTAGE
is used in the operation of this equipment
LETHAL VOLTAGE
may be present on the terminals, observe all safety precautions!
To avoid electrical shock hazard, the operator should not electrically contact
the output HI or sense HI terminals or circuits connected to these terminals.
During operation, lethal voltages of up to 1020 V ac or dc may be present on
these terminals.
Whenever the nature of the operation permits, keep one hand away from
equipment to reduce the hazard of current flowing through vital organs of
the body.
riešenia na presné meranie
http://www.elso.sk

Fluke 5080A Specifications

General

DC Voltage Range	0 to 1020 V
AC Voltage Range	0 to 1020 V
DC Current Range	0 to 20.5 A
Interface	RS-232, IEEE-488
Category	Calibrator
Outputs	Voltage, Current, Resistance
Resistance Range	0 to 100 MΩ
Frequency Range	10 Hz to 1 MHz
Power Supply	100 V to 240 V, 50 Hz to 60 Hz