Calibrator
Accessories and Options
27
Accessories and Options
Table 7 lists accessories and options available for the Calibrator.
Table 7. Accessories and Options
Accessory/Option
Fluke Model/
Part Number
5080A Service Manual 3790039
Oscilloscope Calibration Option
[1]
5080A-SC
MegOhm Meter Calibration Option
[1]
5080A-MEG
Transit Case with Wheels 5080A/CASE
Double Banana Plug Adapter 105825
5 A/250 V Time Delay Fuse (mains fuse for 100 V/120 V line voltage) 109215
2.5 A/250 V Time Delay Fuse (mains fuse for 200 V/240 V line voltage) 851931
4 A/500 V Fuse (AUX current output fuse) 3674001
25 A/250 V Fuse (20A current output fuse) 3470596
RS-232 Interface Cable RS43
Ethernet Internet Cable 884X-ETH
Calibration Software for Automated Calibration with 5080A 5080/CAL
License disk for MET/CAL. Automated Calibration software. MET/BASE-5 or later
required.
MET/CAL-L
License disk upgrade. MET/BASE-7U and prior version of MET/CAL required. MET/CAL-LU
Asset Management Software. MET/BASE-5 or later required MET/TRACK
System engine. Requires licenses for one or more client applications (MET/CAL-L,
and/or MET/TRACK)
MET/BASE
Manual Calibration Software. MET/BASE and MET/TRACK required. Manual MET/CAL
[1] Options can be ordered factory installed with a new Calibrator (5080A/MEG, 5080A/SC, and 5080A/SC/MEG), or added later at a
Fluke service center for an additional installation and calibration charge.
riešenia na presné meranie
To Next Page
Loading...
