5080A
Getting Started Manual
26
reinstalling it.
4. Reinstall the filter element by performing the filter removal steps in reverse order.
TO CLEAN FILTER REMOVE FROM INSTRUMENT
AND FLUSH WITH SOAPY WATER
WARNING
GROUNDING CONNECTOR IN POWER CORD MUST BE
CONNECTED TO ENSURE PROTECTION FROM ELECTRIC SHOCK
CHASSIS
GROUND
oq062f.eps
Figure 6. Accessing the Air Filter
General Cleaning
For general cleaning, wipe the case, front-panel keys, and lens using a soft cloth slightly
dampened with water or a non-abrasive mild cleaning solution that does not harm
plastics.
W Caution
To avoid damaging the plastic materials used in the Calibrator,
do not use aromatic hydrocarbons or chlorinated solvents for
cleaning.
riešenia na presné meranie
riešenia na presné meranie™
Elso Philips Service; tel: +421 32 6582410
email: elso@elso.sk; web: www.elso.sk
To Next Page
Loading...
