Multifunction Electrical Tester Calibrator
Instruction Manuals
3
Instruction Manuals
The Calibrator ships with a manual set that contains information for the user and
programmer. The set includes:
• 5320A Getting Started Manual (PN 2634331)
• 5320A Users Manual (CD ROM, PN 2634346)
Order additional copies of these manuals using the part numbers provided. For ordering
instructions, refer to a Fluke catalog or contact a Fluke sales representative.
5320A Getting Started Manual
Use this manual for basic getting started information, contacting Fluke, unpacking, and
general specifications. This manual also provides setup and operation information for
the Calibrator, descriptions of the Calibrator’s front and rear-panel features, and
information about setting up and powering up the Calibrator. Please read this
information before operating the Calibrator.
5320A Users Manual
The Users Manual is available in PDF format on the CD-ROM provided with your
Calibrator. It contains information on operating the Calibrator from the front panel. The
Calibrating Instruments section explains the Calibrator’s functions and the steps
necessary to use them. In addition to operational instructions, this manual also contains
information on general maintenance and a verification procedure to ensure the
Calibrator is operating within specifications.
Contacting Fluke
To order accessories, receive operating assistance, or get the location of the nearest
Fluke distributor or Service Center, call:
USA: 1-800-44-FLUKE (1-800-443-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-678-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Service in USA: 1-888-99-FLUKE (1-888-993-5853)
Or, visit Fluke's Web site at www.fluke.com
. To register this product, visit
register.fluke.com
.
To Next Page
Loading...
Need help?
General
