64 Max
Users Manual
12
Advanced Features
Advanced features are listed below.
EMS setting
Make measurements with the correct EMS value to ensure accuracy.
To adjust the EMS value: (See Figure 6 and Table 2)
1. In HOLD status, push SEL several times until EMS and its value are shown in the upper-
right corner.
2. Push or to adjust the EMS value as necessary.
3. Push SEL several times or pull the trigger to quit the process and return to HOLD status.
1.888.610.7664 info@Fluke-Direct.com
Fluke-Direct.com
To Next Page
Loading...
