Fluke 64 max - Set Date and Time

IR Thermometer
Overview
23
Set Date and Time
To set the Date and Time:
1. In HOLD status, push the SEL button for >3 seconds to enter the second-level menu.
2. Push SEL several times until DATE shows on the display.
3. Push SET to toggle the year formats.
4. Push SEL to accept the format and start the date adjustment.
5. The active item flashes, push  or  to adjust the value and then push SEL to move to
the next item.
6. When the date is complete, push SEL until TIME shows on the display.
7. Push SET to toggle a 12 hour or 24 hour display.
8. Push SEL to accept the time format and start the time adjustment.
9. The active item flashes, push  or  to adjust the value and then push SEL to move to
the next item.
10. Push SEL or pull the trigger to exit the setup.
1.888.610.7664 info@Fluke-Direct.com
Fluke-Direct.com