Fluke 64 max - Select MAX;MIN;AVG;DIF

64 Max
Users Manual
14
Select MAX/MIN/AVG/DIF
To select MAX, MIN, AVG, or DIF, see Figure 9:
1. In HOLD status, push SEL until MAX (MIN/AVG/DIF) shows.
2. Push SET to select MAX, MIN, AVG, or DIF.
3. Push SEL several times or pull the trigger to exit the setup. The feature selected is
shown on the display.
Note
You can select only one of MAX, MIN, AVG, or DIF.
1.888.610.7664 info@Fluke-Direct.com
Fluke-Direct.com