Fluke 64 max User Manual

IR Thermometer
Overview
21
For Interval monitoring: The Product counts down from the time interval, wakes up
automatically and makes a measurement, and then saves the reading. The Product then goes
to sleep, restarts the count down and repeats the process. The feature automatically turns off
when the memory is full or you turn off the feature. To make repeated measurements at a
specified interval:
1. In HOLD status, push SEL for >3 seconds to enter in the second-level menu.
2. Push SEL until AUTO CAPTURE and INTERVAL show on the display.
3. Push SET to switch the feature on or off.
4. When the feature is on, push  or  to adjust the displayed value as necessary. The
displayed value is the start value of the countdown counter.
5. Push SEL several times or pull the trigger to exit the setup.
Note
• If the Interval monitoring feature is turned on when Auto Capture is
already on, both features work together. The automatic measurement will
be at the time set for Auto Capture. This allows the user to select the
specified time to start the Interval monitoring measurement.
1.888.610.7664 info@Fluke-Direct.com
Fluke-Direct.com

Fluke 64 max Specifications

General

Product color	Black, Yellow
Response time	500 ms
Spectral response	8 - 14 µm
Temperature measurement range	-30 - 600 °C
Temperature measurement units	F, °C
Battery life	30 h
Battery type	AA
Number of batteries supported	1
Operating altitude	0 - 2000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Display technology	LCD

Weight and Dimensions

Depth	75 mm
Width	85 mm
Height	175 mm
Weight	255 g