68x Series
Getting Started
14
Use
E
to access additional softkeys on the current functional level. The
E
key is operational only when the
MORE
label is displayed above the far
right softkey label (in the status line) as shown in Figure 3.
Figure 7. Ethernet Top-Level Softkeys (Version 9.50)
Figure 8. Token Ring Top-Level Softkeys (Version 9.50)
The softkey menu structure uses two kinds of softkey labels. The top-level
softkeys, with the exception of
Setup/Utils
, access test categories. The small
boxes in the lower right-hand corners of the top-level softkey labels indicate
that there is a second level of softkeys beneath these softkeys. Pressing one of
these softkeys causes the next level of softkeys to be displayed.
A test is selected when its softkey label is highlighted. A highlighted softkey
label is displayed in inverse video. In inverse-video, text is displayed in white
on a black background. Pressing a highlighted test softkey executes the test.
To Next Page
Loading...
