Fluke 683 - Dedicated Keys

Enterprise LANMeter
Setting Up Your Instrument
15
Dedicated Keys
Dedicated keys provide access to commonly used functions. The following
paragraphs describe each dedicated key:
Note
Never press and hold down any key while pressing a second key.
Always press and release the first key and then press the second key.
For example, when you press and release
H
, the instrument
temporarily replaces the
MORE
display label (on the status line) with
SHIFT
and executes the shift function of the next key pressed.
ENTER/RUN Press I in the following situations:
1. Press I to confirm operations or to close some
pop-up windows.
2. Press I to run the highlighted test.
3. Press I from the top-level display screen to run
Auto Test.
4. Press I while a test is running, or after it has
stopped, to zoom-in (or follow the hyperlinks).
The instrument will beep if you press I when
there are no additional zoom-in items.
When a test is stopped and displaying its result
screen, you must press the Run Again softkey, not
I to run the test again. For tests that run
simultaneous tests (like Network Stats) you can use
the available test softkeys to run the desired test.
MORE Press E to access an additional row of softkey labels.
The instrument displays the MORE label above the far
right softkey label when additional softkeys at the same
level are available but not displayed.