Fluke 8846A User Manual

4-1
Chapter 4
Making Measurements
Title Page
Introduction........................................................................................................ 4-3
Selecting Function Modifiers............................................................................. 4-3
Activating the Secondary Display ..................................................................... 4-3
Measuring Voltage............................................................................................. 4-4
Measuring DC Voltage.................................................................................. 4-4
Measuring AC Voltage.................................................................................. 4-5
Measuring Frequency and Period ...................................................................... 4-7
Measuring Resistance ........................................................................................ 4-7
Making a Two-wire Resistance Measurement .............................................. 4-8
Making a Four-wire Resistance Measurement .............................................. 4-8
Measuring Current ............................................................................................. 4-10
Measuring DC Current .................................................................................. 4-11
Measuring AC Current .................................................................................. 4-12
Measuring Capacitance (8846A only) ............................................................... 4-13
Measuring RTD Temperature (8846A only) ..................................................... 4-14
Testing Continuity ............................................................................................. 4-15
Checking Diodes................................................................................................ 4-16
Making a Triggered Measurement..................................................................... 4-17
Setting the Trigger Mode............................................................................... 4-17
Setting a Trigger Delay ................................................................................. 4-17
Setting Number of Samples per Trigger........................................................ 4-18
Connecting an External Trigger .................................................................... 4-18
Monitoring the Measurement-Complete Signal................................................. 4-18

Fluke 8846A Specifications

General

Frequency Range	3 Hz to 300 kHz
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	10 Ω to 1 GΩ
Continuity	Yes
Diode Test	Yes
Temperature Measurement	Yes
Display	5.5 digit
Connectivity	USB, RS-232, GPIB
DC Current Range	100 µA to 10 A
AC Current Range	100 µA to 10 A
Frequency Accuracy	0.01 %
Capacitance Range	1 nF to 100 µF
Display Type	VFD
Power Supply	100 V to 240 V
AC Voltage Accuracy	±(0.06% + 0.03% of reading)
Resistance Accuracy	±(0.01% + 0.001% of reading)