Fluke 8846A - Status Reporting Command Summary

8845A/8846A
Programmers Manual
34
Table 15. Status Reporting Command Summary
Command Description
*CLS
*ESE <enable value>
*ESE?
*ESR?
*OPC
*OPC?
*PSC {0|1}
*PSC?
*SRE <enable value>
*SRE?
*STB?
SYSTem
:ERRor?
STATus
:PRESet
:QUEStionable
:ENABle <enable value>
:ENABle?
:EVENt?
Clear status byte summary and all event registers
Enable bits in standard event register
Retreive standard event enable register
Retrieve standard event register
Set Operation Complete bit in standard event
register
Returns “1” in output buffer after command exec.
Power-on status clear
Retrieve power-on status clear setting
Enable bits in status byte register
Retrieve bits in status byte register
Retrieve the status byte summary register
Path to meter’s error queue
Retreive meter’s error queue
Path to meter’s status system
Clear questionable data enable register
Path to questionable data register
Enable bits in questionable data enable register
Retrieve questionable data register
Retrieve questionable data enable register