Fluke 9062 User Manual

Motor & Phase Rotation Indicator
Using the Motor & Phase Rotation Indicator
9
Non-Contact Rotary Field Indication
For non-contact rotary field indication:
1. Disconnect all test leads from the 9062.
2. Position the Indicator on the motor so that it is parallel to the length of the motor shaft.
The Indicator should be one inch or closer to the motor. See Figure 3.
3. Press the ON/OFF button. The green ON indicator shows that the instrument is ready
for testing.
Either the Clockwise or Counter Clockwise Rotary indicator illuminates showing the
type of rotary field direction present.
Note
The Indicator will not operate with engines controlled by frequency converters. The
bottom of the 9062 should be oriented towards the drive shaft. See the Orientation
Symbol on the 9062.

Fluke 9062 Specifications

General

Housing color	Black, Yellow
Frequency range	2 - 400 Hz
3 phase indication	Yes
Operating altitude	0 - 2000 m
Phase display range	120 - 400 V
Operating voltage (max)	400 V
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	15 - 80 %
International Protection (IP) code	IP40
Battery voltage	9 V
Number of batteries supported	1

Weight and Dimensions

Depth	27 mm
Width	61 mm
Height	124 mm