Fluke CableAnalyzer DSX-602 - Change the Language; Buttons to Do Tests and Save Results

DSX-602 CableAnalyzer
Users Manual
20
Change the Language
On the home screen, tap the TOOLS icon, tap Language, then tap
a language.
Buttons to Do Tests and Save Results
When a test is completed and more than one button shows at the
bottom of the screen, the tester highlights one in yellow to
recommend which one to tap. Figure 8 shows the buttons you will
see.
Note
To change the Auto Save setting, tap the Next ID
panel on the home screen.
BK40.EPS
Figure 8. FIX LATER, TEST AGAIN, and TEST Buttons and the TEST Key
A
B
C
D
F
E
G