Fluke CableAnalyzer DSX-602 - DIAGNOSTIC Tab

DSX-602 CableAnalyzer
Users Manual
50
DIAGNOSTIC Tab
If an Autotest on twisted pair cabling fails or has marginal results,
the DSX-602 CableAnalyzer automatically gives you HDTDR and
HDTDX plots to help you find faults. To see the plots, tap the
DIAGNOSTIC tab, then tap the HDTDR or HDTDX panel (Figure
20).
To get only diagnostics results, select Diagnostics from the TOOLS
menu. These results do not include a PASS/FAIL status.
For more information on the HDTDR and HDTDX plots, see the
Technical Reference Handbook.
BA192.EPS
Figure 20. Examples of Diagnostic Screens