Fluke CableAnalyzer DSX-602 - SYNC PROJECTS Screen

DSX-602 CableAnalyzer
Users Manual
86
6 If you use other people’s LinkWare Live accounts, the
ORGANIZATION screen shows. Tap the organization you want
to use.
7 On the SYNC PROJECTS screen (Figure 30), select the projects
you want to sync, then tap SYNC.
See Figure 30:
 Projects in the On this tester section are possibly also in
LinkWare Live. You can upload results from these projects to
LinkWare Live.
If the project in LinkWare Live has test settings or cable IDs that
are different from those in the tester, you can download the
new settings to the tester.
GPU190.EPS
Figure 30. SYNC PROJECTS Screen
A
B
C