Fluke CableAnalyzer DSX-602 - PROJECT Screen

Chapter 5: Use Projects
The PROJECT Screen
77
GPU08.EPS
Figure 28. PROJECT Screen
: The number of DSX CableAnalyzer results that have PASS*
results. PASS* results have measurements within the range of
accuracy uncertainty for the tester. See “PASS*/FAIL* Results” on
page 41.
 Test Setup: The tests that are available in the project.
To add a test to the project, tap NEW TEST.
 Cable ID Sets: The sets of IDs the tester can use for the names of
test results.
To add a set of IDs to the project, tap NEW ID SET. See Figure 29.
J
A
B
G
E
F
H
C
D
J
I