Chapter 6: Sync Projects with LinkWare
™
Live
Change the Network Settings
89
Table 5. Settings for the Wi-Fi Connection
Setting Description
Address Most networks use DHCP.
DHCP address
settings
SSID: The tester does a scan for wireless networks and
shows a list of available networks. Select the correct SSID.
To connect to a hidden network, tap ADD SSID.
Security:
Authentication: Select the authentication type that the
network uses:
Open: Security credentials are not necessary.
WEP: Select an encryption method and enter the
necessary keys.
WPA/WPA2 Personal: Enter the password for the
network.
WPA/WPA2 Enterprise:
EAP: Select an EAP type that is appropriate for the
authentication server.
User and Password: Enter a user name (login name)
and password for the network.
Alternate ID: The tester can use the Alternate ID with
some EAP methods to send an empty or anonymous
identity while the tester makes a private connection.
The tester then uses the private connection to send
the User name and Password you entered.
The tester can also use the Alternate ID to send the
User name and Password to an authentication server
in a different realm. In this situation, the Alternate ID
can have a format such as
anonymous@MyCompany.com or /MyCompany/
anonymous.
To Next Page
Loading...
