Fluke CombiScope PM3370B - Command Summary

COMMAND REFERENCE 4 - 5
4.2 Command Summary
The following list is a summary of all commands and parameters in alphabetical
order, beginning with the common commands. The corresponding queries of the
commands are not listed. If a command has no query, this is reported in the
column NOTES as "no query". If only a query exists, it is reported in the column
NOTES as "query only".
COMMAND:
PARAMETERS:
NOTES:
*
CAL?
query only
response = 0 | 1
*
CLS
no query
*
ESE
<numeric_data>
range = 0 .. 255
*
ESR?
query only
*
IDN?
query only
*
OPC
response to
*
OPC? is always 1
*
OPT?
query only
*
RCL
<numeric_data>
range = 0 .. 10
*
RST
no query
*
SAV
<numeric_data>
range = 1 .. 10
*
SRE
<numeric_data>
range = 0 .. 255
*
STB?
query only
*
TRG
no query
*
TST?
query only
*
WAI
no query