4 - 40 COMMAND REFERENCE
CALCulate<n>:TRANsform:HISTogram:STATe
Syntax:
CALCulate<n>:TRANsform:HISTogram:STATe <Boolean>
<n> [1] | 2
Query form:
CALCulate<n>:TRANsform:HISTogram:STATe?
Response:
0 | 1
0 Histogram function turned off.
1 Histogram function turned on.
Description:
This command switches the HISTogram function on or off. The result of the
histogram function is stored in M1_1 for CALCulate1 and in M2_1 for
CALCulate2.
After a
*
RST command, the histogram function is turned off.
Example:
Send
→
CALCulate:TRANsform:HISTogram:STATe ON Switches the
histogram
function on.
Front panel compliance:
The CALCulate1 and CALCulate2 commands use the MATH1 and MATH2
features of the CombiScope instrument.
To Next Page
Loading...
