4 - 104 COMMAND REFERENCE
Example 1:
Send
→ SYSTem:KEY 101 Simulates the pressing of AUTOSET.
Send
→ SYSTem:KEY?
Read
← 101 Returns the last key simulation.
Example 2:
Send
→ *RST Resets the instrument.
Send
→ DISPlay:MENU UTIL Enables UTILITY softkey menu.
Send
→ SYSTem:KEY 2;KEY 5;KEY 4 Selects the options PROBE, PROBE
CORR, 10:1.
Send
→ DISPlay:MENU:STATe OFF Disables UTILITY softkey menu.
In this example the probe correction factor for input channel 1 is set at 10:1, using
the softkey menu UTILITY.
Front panel compliance:
The SYSTem:KEY command is the remote equivalent of pressing all front panel
keys.
To Next Page