Fluke CombiScope PM3370B - Page 227

COMMAND REFERENCE 4 - 127
TRIGger[:SEQuence[1]]:VIDeo:FIELd[:NUMBer]
TRIGger[:STARt]:VIDeo:FIELd[:NUMBer]
TRIGger[:SEQuence[1]]:VIDeo:FIELd:SELect
TRIGger[:STARt]:VIDeo:FIELd:SELect
Syntax:
TRIGger[:SEQuence[1]]:VIDeo:FIELd[:NUMBer] <NRf>
| MINimum | MAXimum
TRIGger[:SEQuence[1]]:VIDeo:FIELd:SELect ALL | NUMBer
Alias:
TRIGger[:STARt]:VIDeo:FIELd[:NUMBer] <NRf>
| MINimum | MAXimum
TRIGger[:STARt]:VIDeo:FIELd:SELect ALL | NUMBer
<NRf> 1 | 2
1 | MINimum Selects field1 triggering.
2 | MAXimum Selects field2 triggering.
ALL Selects lines triggering.
NUMBer Selects field triggering.
Query form:
TRIGger[:SEQuence[1]]:VIDeo:FIELd[:NUMBer]?
MINimum | MAXimum
Alias:
TRIGger[:STARt]:VIDeo:FIELd[:NUMBer] <NRf>
| MINimum | MAXimum
Response:
1 | 2
1 Field1 triggering selected.
2 Field2 triggering selected.
If MINimum was specified, 1 is returned. If MAXimum was specified,
2 is returned.
Query form:
TRIGger[:SEQuence[1]]:VIDeo:FIELd:SELect?
Alias:
TRIGger[:STARt]:VIDeo:FIELd:SELect?
Response: ALL | NUMB
ALL Lines triggering selected.
NUMB Field triggering selected.