Maintenance and Specifications
Specifications
8
8-9
Compatibility with Remotes and Link Interface Adapters
The DSP-4100 and DSP-4300 test tools are compatible only with DSP-4100SR
and DSP-4300SR remote units, respectively. The DSP-4100 and DSP-4300
remotes are not compatible with DSP-100, DSP-2000, or DSP-4000 test tools. The
LIAs are not compatible with DSP-100 or DSP-2000 test tools.
The test tool can store calibration data for two different remotes.
Standard Link Interface Adapters
DSP-LIA011 Basic Link Adapter for Cat 5E
Plug type and life: shielded Cat 5E RJ45; >5000 insertions
Cable type: 100 Ω Cat 6 SsTP
Test supported: shielded and unshielded cable, TIA Cat 3, 4, 5, and 5E basic
links, and ISO/IEC, EN50173 Class C and D permanent links
DSP-LIA012 Channel Adapter for Cat 6
Plug type and life: shielded RJ45; >5000 insertions
Tests supported: shielded and unshielded cable, TIA Cat 3, 4, 5, 5E, and 6
channels, and ISO/IEC Class C and D channels
DSP-LIA013 Channel/Traffic Adapter for Cat 6
Plug type and life: shielded RJ45; >5000 insertions
Tests supported: shielded and unshielded cable, TIA Cat 3, 4, 5, 5E, and 6
channels, ISO/IEC Class C and D channels
Also performs LAN traffic tests (see specifications for LAN traffic
monitoring)
DSP-LIA101 Permanent Link Adapter for Cat 6
Personality module plug type and life: shielded Cat 6 RJ45; >5000 insertions
Test supported: shielded and unshielded cable, TIA Cat 3, 4, 5, 5E, and 6, and
ISO/IEC, EN50173 Class C, D, and E permanent links
To Next Page
Loading...
