Fluke DSP-4100 - A-1. Tests Supported by Standard Link Interface Adapters

DSP-4000 Series
Users Manual
A-2
Table A-1. Tests Supported by Standard Link Interface Adapters
Standard or Test
DSP-LIA011
Basic Link
DSP-LIA012 and
DSP-LIA013
Channel
DSP-LIA101
Permanent Link
TIA Cat 3, 5, and 5E Basic and
Permanent Link
X
X
TIA Cat 3, 5, 5E, and 6 Channel X
TIA Cat 6 Permanent Link X
Class E Permanent Link X
TIA TSB-75 MUTO Link
X
XX
ISO11801 Channel Class C, D X
ISO11801 Permanent Link Class C, D XX
ISO Link Class C, D XX X
EN 50173 Class C, D XX X
Aus/NZ Class C and D Basic Link
XX
Aus/NZ Class C and D Channel
X
IEEE 10/100/1000BASE-T X
X
X
TokenRing, All
XX X
TP-PMD
XX X
All coaxial standards
X
1
Impulse noise monitor and tone generator
XX X
Traffic monitoring on twisted pair cable DSP-LIA013
only
Hub port locator and hub port capabilities
test
DSP-LIA013
only
Optical power and loss measurements
using a DSP-FOM Fiber Optic Meter
2
XX X
1. All coaxial testing requires the RJ-45 to BNC adapter.
2. Fiber test standards are supported by optional Fiber Test Adapters.