DTX Series CableAnalyzer
Technical Reference Handbook
A-2
Figure A-1. Equipment for Testing the Test Reference Cords
amd173.eps
A
Tester with a fiber module and a connector adapter
installed. Use the connector adapter that connects to
the cords you will test.
B
Fiber cleaning supplies
C
A microscope for inspecting fiber connectors (the FT500
FiberInspector Mini Video Microscope is shown)
D
A test reference cord that you are sure is good. One
connector is SC. The other connector is the same as on
the cords you will test.
E
Singlemode adapter for the connectors on the cords
you will test
F
You must use a mandrel when you test multimode fiber.
Select the correct size for the fiber you will test.
To Next Page
Loading...
