LinkIQ
Users Manual
8
Ta b l e 5 is a list of the menu controls.
Table 5. Menu Controls
Item Control Function
Slider bar
Adjusts a value. Touch and slide the bar to the left to
decrease the value or to the right to increase the value.
Selection indicator
When shown under a selection, indicates which of two
options is selected.
Option selected.
Toggle switch
Turns on or off a feature.
Feature is on or enabled.
Feature is off or disabled.
Selection indicator
Y/+
To select an item from a list, tap an option. The
indicator shows the selected option. In the Results
menu more than one item may be selected at a time.
See Results Menu.
Option menu button
U
Tap to open an option menu to adjust a setting.
Numerical value
adjuster buttons
I/L
Decreases a numerical value.
J/K
Increases a numerical value.
Back arrow
G
Return to the previous screen and, if necessary, save
changes.
Exit button
n
Return to the previous screen without saving changes.
OK button OK
Save changes or do an action. Then, return to the
previous screen.
Cancel button CANCEL Do not do an action and return to the previous screen.
Add feature button Tap to add a feature such as an IP address.
Delete feature
button
Tap to delete a feature such as an IP address.
Delete text button Tap to delete text typed in a field.
To Next Page
Loading...
