Need help?Do you have a question about the Flybox Eclipse and is the answer not in the manual?
General| Resolution | 1024 x 768 pixels |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Display Size | 10.4 inches |
| Display Type | LCD |
| Interface | RS-232, Ethernet |
| Certification | TSO-C113 |
Specifies the physical size, mounting cut-out, and overall dimensions of the ECLIPSE unit.
Details the D-SUB connectors (CON1, CON2, CON3) and their pin assignments for backpanel wiring.
Explains how to connect various aircraft sensors (CHT, EGT, OAT, etc.) and input/output signals.
Identifies and describes the function of the buttons, knob, and display indicators on the front panel.
Outlines the process for configuring system settings, sensors, gauges, alarms, and other preferences.
Details essential calibration steps for magnetic sensors, fuel flow transducer, and fuel level sensors.
Describes how to view engine data (EIS), flight data (PFD), and log flight information.
Lists required components and outlines the autopilot system's capabilities and functions.
Covers the mechanical and electrical installation steps for servos, ACU, and connections.
Explains how to engage, disengage, and use the autopilot system for various flight modes.
Describes potential autopilot disengagements and associated error messages or alarms.
Lists the hardware specifications, dimensions, electrical requirements, and supported sensors of the ECLIPSE unit.
Outlines the terms and conditions of the product warranty.
To Next Page