Flybox Eclipse - CON2 Connections

CON2 connections
TABLE2 CON2 CONNECTIONS
Pin # Description
1
+12 V for current sensor
2
Current sensor signal input
3
GND for fuel flow sensor
4
+12V for fuel pressure sensor
5
Fuel pressure sensor input
6
LEFT Televel input
7
GND
8
MAIN Televel input
9
GND
10
Oil temperature sensor input
11
OAT (outside air temp.) sensor input
12
Low-level intercom audio out (use shielded wires)
13
GND for video input #1
14
+12V for camera #1
15
Video input #2
16
GND for video input #3
17
+12V for camera #3
18
Open-collector alarm-out (active low) max 400mA / 5W
19
RPM pickup input
20
GND for current sensor
21
+12V for fuel flow sensor
22
Fuel flow sensor input
23
GND for fuel pressure sensor
24
+12V for capacitive fuel level sensor (if used)
25
RIGHT Televel input
26
+12V for capacitive fuel level sensor (if used)
27
Not used/Reserved
28
Oil pressure sensor input
29
CAT (carburator air temp.) sensor input
30
GND for low-level intercom audio out (use shielded wires)
31
GND
32
Video input #1
33
+12V for camera #2
34
GND for video input #2
35
Video input #3
36
Not used/Reserved
37
GND
12