CON2 connections
CON2 connections (37-pin d-sub receptacle, view from wiring side)
NOTES:
It is not necessary to connect the low-level audio output connections (pin #12 and #30) if you have already connected the high-
level audio output (as explained in “CON1 connections”). The low-level output require more accurate wiring because is more
susceptible to electric noise (use shielded wire and keep away from source of electric noise like, for example, radio antenna or
wirings). For this reason is generally preferable to use the high-level audio output and leave unused the low-level output.
13
To Next Page
Loading...