Flybox Eclipse - CAT Gauge Setup; MAP Gauge Setup; OAT Gauge Setup; Oil Pressure Gauge Setup

• OIL PRESSURE GAUGE SETUP
Max : set the top limit of the oil pressure gauge.
High : set the transition pressure from yellow to high red zone of the oil pressure gauge.
Mid : set the transition pressure from green to yellow zone of the oil pressure gauge.
Low : set the transition pressure from low red to green zone of the oil pressure gauge.
NOTE: The minimum value is fixed to zero.
• CAT GAUGE SETUP
Max : set the top limit of the CAT gauge.
High : set the transition pressure from green to red zone of the CAT gauge.
Min : set the bottom limit of the CAT gauge.
• OAT GAUGE SETUP
Max : set the top limit of the OAT gauge.
Min : set the bottom limit of the OAT gauge.
• RPM GAUGE SETUP
Max : set the top limit of the RPM gauge.
High : set the transition RPM from yellow to red zone of the RPM gauge.
Mid : set the transition RPM from green to yellow zone of the RPM gauge.
Low : set the bottom limit of the RPM gauge.
• MAP GAUGE SETUP
Max : set the top limit of the MAP gauge.
High : set the transition value from green to red zone of the MAP gauge.
Low : set the bottom limit of the MAP gauge.
28
Low
Zero
Mid
High
Max
Low
Mid
High
Max
Low
High
Max
Min
High
Max