9. Using the ECLIPSE MFD
ECLIPSE MFD, connected to a main ECLIPSE unit (EIS, PFD or IFIS) permits showing all data on the copilot side. This version has
the same design of the other 3 ECLIPSE models but it does not have any sensors integrated: it shows all data available on the
main ECLIPSE to which is connected.
•
INSTALLATION AND DIMENSIONS
: same as EIS/PFD/IFIS ECLIPSE, refer to chapter 2.
•
ELECTRICAL WIRING
: Unlike the main ECLIPSE unit, in the MFD there is only the “CON1” connector:
51
To Next Page
Loading...