Flybox Eclipse - Page 52

25-pin D-sub plug, view from wiring side
The wiring required are only +12V, GND and 2 connections to the main ECLIPSE unit, as follows:
TABLE 1 CON1 CONNECTIONS
Pin # Description
1
+12V Main supply
2
GND Main supply
3
Not used
4
Not used
5
Not used
6
Not used
7
CAN0H signal for connection with main ECLIPSE unit (connect to pin#7 of main ECLIPSE)
8
Not used
9
Not used
10
Not used
11
Not used
12
Not used
13
Not used
14
+12V for optional auxiliary backup battery
15
Not used
16
Not used
17
Not used
18
Not used
19
Not used
20
CAN0L signal for connection with main ECLIPSE unit (connect to pin#20 of main ECLIPSE)
21
Not used
22
Not used
23
Not used
24
Not used
25
Not used
NOTE: Use twisted or shielded wires to connect pin #7 and pin #20 of the two ECLIPSE.
52