- Insert the SD card in the ECLIPSE SD slot on the frontpanel.
- ECLIPSE automatically check if in the SD card are available upgraded firmware versions and it show a summary screen with all
the firmware versions of the ECLPSE and available in the SD card.
- If the instrument are already upgraded to the latest firmware versions it show a screen like the following (notice the
“NO UPGRADE REQUIRED” indication):
In this case no further action is required: turn off the ECLIPSE and remove the SD card (
*
).
- If instead in the SD card are available newer firmware versions ECLIPSE show a screen like the following (notice the
“START UPGRADE?” indication):
- To proceed with the upgrading procedure press “YES” (P3 button); ECLIPSE will show a screen with the current upgrading
status:
- Wait until all availables firmware is upgraded completely. When the procedure is completed ECLIPSE will show the following
screen:
Now your ECLIPSE is correctly upgraded. Turn off the instrument and remove the SD card.
(
*
) It's also possible at any time to make a firmware update for changing the language of the vocal alerts furnished by ECLIPSE
on the audio output; to do this simply rotate the knob and select your preferred language, for example to switch from italian to
english:
35
To Next Page
Loading...